Australia Zoo Wildlife Hospital
Australia Zoo Wildlife Hospital (AZWH) is one of the busiest and largest wildlife hospitals in the world.
Their dedicated wildlife veterinarians, vet nurses and volunteers work around the clock to rescue, rehabilitate and release sick, injured, orphaned and displaced animals and native
This month you can help the hospital and their animals by sewing these vibrantly-themed cage covers in various sizes! The covers attach onto the doors of the hospital’s bird and reptile cages to create a private environment where animals can get the rest and recovery they need.
Sizes and fabrics
The hospital has asked for bird and reptile cage covers in numerous sizes listed below. All covers you make will be used and greatly valued. Covers are rotated and washed regularly in warm water for disinfection so make sure your material is pre-washed and shrunk before you measure and sew.
- Use fish or desert print fabric OR sandy desert coloured fabric
- Sizes (width x height)
- 570mm x 350mm
- 1190mm x 290mm
- 1140mm x 460mm
- 320mm x 740mm
- 880mm x 380mm.
- Use bird, trees or plant-print fabric OR some green fabric with a bright coloured embroidery thread
- Sizes (width x height)
- 490mm x 605mm
- 850mm x 760mm
- 1150mm x 760mm
- 1050mm x 1230mm (upright)
- 820mm x 270mm (make 2 curtains)
- 1370mm x 980mm.
- Measure fabric in the dimensions listed. Before you cut:
– Add 9cm to the height of your fabric (5cm to form a top flap that will hook the cover onto the cage door and 2 x 2cm turned edge seams at top and bottom).
– Add 4cm to the width of your fabric (to allow for 2 x 2cm turn-and-turn edge seams on both sides)
- Press in top and bottom of fabric 2cm. Use the crease as a guide to sew a turn-and-turn edge. For each edge, fold in the cut edge of the material half way to the crease, then fold it over again to meet the crease. Pin and stitch across from end to end.
- Fold down 5cm of fabric from the top edge (right sides together) and pin in place. This will form the flap. Stitch down each side of the folded flap with a 2cm seam allowance.
- Turn right side out and press the side edges of fabric 2cm each. Stitch down edges using a turn-and-turn seam (same as in step 2).
- OPTIONAL: Place the embroidery design in the lower left hand side of the cover. The design is available as a single 13cm x 18cm design, or in two parts of 10cm x 10cm. Print out a template to see where it sits well for you.
- Logo embroidery file AZWH – 10cmx10cm, 2 parts (ZIP, 320KB)
- Logo embroidery file AZWH – 13x18cm (ZIP, 320KB)
SENDING IN YOUR DONATIONS
Send your completed covers into Echidna Sewing Head Office for us to pass onto the Australia Zoo Wildlife Hospital. Be sure to include your name, postal address and contact details with your donation.
56 Neumann Road
Capalaba Qld 4159
Drop your cage covers into your local Echidna store.
HOW LONG DO I HAVE TO CREATE THE PROJECT?
The Australia Zoo Wildlife Hospital sewalong will run from 1–30 April, 2018.
We’ll be giving away a number of prizes throughout in the year. To enter, simply take a photo of your finished project this month and post it to our Echidna Sewing facebook community! We’ll also be giving away a number of prizes at random throughout the year, and your sewalong project is eligible for one of these prizes no matter which month it’s sent in.
THINGS TO REMEMBER
Sewalongs are a great way to get inspired by what everyone creates, while giving to a worthy cause. If you’re new to sewing and embroidery this is a great chance to get involved and have fun no matter what the outcome. Any excuse to put your sewing and embroidery machines to good use is a great one.
If you have your own sewing/embroidery blog you can save the following badges and post it on your blog entry, linking back to this page.